固井水泥浆实验室仪器
稠化仪
高温高压养护釜
机械式抗压强度仪
超声波抗压强度仪
静胶凝强度仪
力学性能分析仪
气窜分析仪
高温高压失水仪
粘度计/流变仪
水泥收缩与膨胀分析仪
水泥搅拌与常压养护
CO2/H2S高温高压腐蚀仪
移动式水泥/泥浆实验室
数据采集与系统控制
  酸化压裂液实验室仪器
岩芯-液体/岩芯伤害/底层相应分析仪
剪切历史模拟仪
高温高压粘度计
流体模组评价仪
阻垢剂动态评价仪
高温高压泡沫流变仪
  油藏分析仪器
PVT3000系统简介
PVT3000高压物性(相态)分析仪
落球粘度计
手动计量泵
混样器
气量计
转样器
高压取样筒
平衡闪蒸分离器
气体增压器
液压泵系统
Q6000精密计量泵
电磁粘度模块
毛细管粘度模块
ARS固相沉积检测模块
浮动活塞筒模块
  钻井液分析仪器
高温高压旋转粘度计
常压旋转粘度计
管式粘度计
  高压/高温仪器
高温高压腐蚀仪
定制产品
  天然气管道及工业仪器
净重仪
露点分析仪
硫化氢分析仪
 
 
 

Model 5617 Corrosion Test Apparatus

Test Corrosivity at High Pressure and High Temperature
Throughout the Oil & Gas Industry, the corrosivity of fluids and the effectiveness of corrosion inhibitors are critical to keeping operations reliable, safe and cost-effective. The Model 5617 Corrosion Test Apparatus is designed to test the reaction rate of corrosive liquids on metals that are subjected to high pressure and high temperature (HPHT) under dynamic conditions.

Simultaneously Test up to Twenty Samples
The Model 5617 is designed to help engineers maximize their testing productivity and optimize test repeatability. The chamber of the instrument can hold up to twenty glass sample bottles with corrosion-resistant caps during a single test. Each bottle may contain a different metal coupon and sample fluid if desired. Corrosion rates are determined by weight loss of each coupon. Alternatively, the instrument can be ordered to hold larger sample bottles.

User-Controlled Test Conditions and Sample Agitation
The test cylinder’s pressure is easily set. During a test, the pressure control gauge controls a pump and release valve to automatically maintain the preset pressure. The automatic temperature control can regulate the temperature heat-up rate which has a maximum of 5.4°F/ 3°C per minute.

Enhanced Safety and Productivity
Enhanced user safety in the Model 5617 begins with a remote control panel. This control panel enables the user to monitor and control the instrument’s pressure and temperature from a safe distance. The pressurization system safely pressurizes and depressurizes the test cylinder. The system includes user-adjustable upper and lower pressure set-points which prevent over and under- pressure conditions during a test. Pressure and temperature can be automatically tracked via an optional Model 5270 Data Acquisition and Control System. The instrument is also designed to minimize the cool-down and clean-up times between tests.

 


Model 5617 Corrosion Test Apparatus

Features
Simultaneously test up to twenty samples
Maximum test pressure of 10,000 psi / 69 MPa
Maximum test temperature of 500°F / 260°C
Remote control panel for enhanced user-safety
Adjustable sample agitation angles and rates
Cooling capabilities
Compatible with the Model 5270 Data Acquisition and Control System

Specimen Capacity:
20 - 4 fl. oz. / 50 mL sample bottles
8 - 8 fl. oz. / 100 mL sample bottles optional

Maximum Pressure: 10,000 psi / 69 MPa
Maximum Temperature: 500°F / 260°C
Maximum Temperature Rise: 5.4°F / 3°C per minute

Agitation Angles: 40°, 60°, or 80°
Agitation Rates: 35, 60, or 100 cycles/minute

Physical Dimensions:
Instrument Size (H x W x D): 67 in. x 39 in. x 33 in. / 170 x 99 x 84 cm
Weight: 2,200 lb / 998 kg

Remote Control Console:
Maximum Separation Distance
50 ft / 15.25 m
Size (H x W x D)
10 in. x 20 in. x 20 in. / 25 x 50 x 50 cm

Weight: 25 lb / 11 kg

Enviromental:
Operating temperature
32° to 105°F / 0 to 40°C

Operating Humidity:
0 to 95% non-condensing

Utilities
Power: 230 VAC ± 15%; 50/60 Hz ± 10%; 10 kVA
Compressed air: 100 to 130 psi / 690 to 900 kPa; intermittent flow
Cooling water: 20 to 80 psi / 140 to 550 kPa